Filter
Top Products
SPEED DOME CAMERA User’s Manual
33
ENGLISH
SPEED DOME CAMERA User’s Manual
32
P1 P2 P3 P4 Defaults
Area5
Area6
Area7
Area8
Mask1
Mask2
Mask3
Mask4
Mask5
Mask6
Mask7
Mask8
Prop. P/T ON / OFF ON
Digital Flip ON / OFF ON
Image Hold ON / OFF OFF
Camera ID ON / OFF ON
Camera Name Edit ON / OFF
Preset Number ON / OFF ON
Preset Name Edit ON / OFF
Sequence Status ON / OFF ON
Area Name ON / OFF OFF
PTZ Position ON / OFF OFF
Alarm Enable ON / OFF OFF
Alarm1 NC/NO/COM
Alarm2 1~4 (Priority)
Alarm2 Preset/Group/Tour
Alarm2 A.Pan/Trace
Setting1 1-4, MD
Setting2 1-4, MD
1-59(Sec)
Timer1 1-59(Min)
1-59(Hour)
1-59(Sec)
Timer2 1-59(Min)
1-59(Hour)
Out Off1
Out Off2
MD Dwell Time ON / OFF 1-59(Sec) / 1-59(Min) 30sec
P/T
Setting
OSD
Setting
Alarm
Setting
Area Setting
Area Masking
Alarm Input
Alarm Out
P1 P2 P3 P4 Defaults
Power On Reset Cancel Execute
Factory Default Set Cancel Execute
Camera Default Set Cancel Execute
Auto Refresh OFF, 1~7Days OFF
Initialize
Status
Symbol Description
1. Auto Run in the Sequence Mode
- “A” symbol is flashing on the right top of the screen.
2. Motion Stabilization Stand-by Operation
- “D” symbol is flashing on the right top of the screen.
3. Alarm operation
- “ ”symbol is flashing on the right top of the screen.
4. Alarm Input #1, 2, 3, 4 Sensor Operation
- “
”, “ ”, “ ” and “ ” symbols are flashing on the right top of the screen.
5. Alarm Output #1, 2 Sensor Operation
- “
” and “ ” symbols are flashing on the right top of the screen.
6. Motion Detect Operation
- “Man Icon” is flashing on the right top of the screen.
7. When there are sub menus under the selected OSD menu
- Numbers are displayed in white colour like on the right top of the screen.
8. When there is no sub menu under the selected OSD menu
- Numbers are displayed in black colour like “
” on the right top of the screen.
• Preset setting is only possible on the OSD menu or using the controller.
Notes
Functional Description