Filter
Top Products
SPEED DOME CAMERA User’s Manual
43
ENGLISH
SPEED DOME CAMERA User’s Manual
42
Ohter
Sync INTERNAL
Image Adj
Freeze OFF
Camera Setting
Focus
White Balance ATW(O)
Exposure
Back Light OFF
AGC MIDDLE
SSNR MIDDLE
Day & Night COLOR
Others
Sepuence Setting
Preset
Swing SEQ
Group SEQ
Tour SEQ
PTZ Trace
Auto Run
Power On Resume OFF
Preset
Setting
Edit
Execute
Clear
Status
Sync: Internal Sync or Line Lock can be selected. Internal Sync is selected by
default. Line Sync function can adjust the output phase of more than 1 unit
without using sync signal generator. When the AC Line Lock is selected, the
phases can be adjusted from 0 to 360 levels. Accordingly, the phase can be
adjusted up to 360˚.
Internal : Internal synchronization
Line Lock : Power line synchronization
Line Lock Phase : The phase of line sync can be selected from 0˚ to 360˚. Initial
value is 225˚.
Image Adj. : Brightness, sharpness and colour density of the image signal can
be adjusted.
Tone : The overall brightness of the screen can be adjusted.
Sharpness : The overall sharpness of the image can be adjusted.
Colour : The overall colour density of the image can be adjusted.
Freeze: Moving image can be stopped and replayed.
ON: Image can be frozen.
OFF: Frozen image is released and the film is replayed.
Preset : 12 items such as Pan/Tilt location, Zoom and Focus are selected among
camera functions and they can be called for monitoring. Total 128 points
can be preset.
Setting : Select the Preset number for setup. Adjust Pan/Tilt/Zoom and press the
Enter key to save the setting. If you want to change the 12 items such as
Focus, Brightness, Iris and Scene Adj., use the Up/Down key to go to and
select the item. If you don’t want to change the 12 items, press the ESC
key to go to the next Preset step.
Edit : You can edit the 12 preset items such as Pan/Tilt location, Zoom and
Focus, which are selected among camera functions.
Execute: Select the Preset number for execution.
Clear : Select the Preset number to delete for clearing.
Status : The current Preset number setup is displayed.
Functional Description
Others 2) Sequence Setting
• Sequence Setting Menu
• Motion Detection Setting
Select Motion Detection in the Preset Setting menu and then turn on the mode.
Sensitivity: This function is used to adjust the sensitivity of Motion Detection. High
sensitivity may cause malfunction of the camera.