Filter
Top Products
ENGLISH
64
Advanced Recording
PHOTO Image Recording
1. Press the PHOTO Button lightly (about halfway down) and hold it.
■ The still picture appears on the LCD monitor.
■ If you do not wish to record, simply release the pressure from the button.
2. Press the PHOTO button fully down.
■ The still picture is recorded for about 6~7 seconds.
3. After the PHOTO has been recorded, the camcorder returns to STBY mode.
Searching for a PHOTO picture
✤
You can search for the recorded still image recorded on tape.
✤ The PHOTO SEARCH works in VCR mode only.
1. Press the MENU button.
■ The menu list will appear.
2. Turn the MENU DIAL to highlight A/V.
3. Push the MENU DIAL to enter the sub-menu.
4. Select PHOTO SEARCH from the submenu and push the MENU DIAL.
5. Search the PHOTO using the (FWD) and (REW) buttons.
■ The PHOTO search process appears on the LCD while you are searching.
■ After completing the search, the camcorder displays the still image.
6. To exit, press the (STOP) button.
1
2
VCR MODE
INITIAL
WIND CUT
REC MODE
PHOTO SEARCH
COPY
AUDIO MODE 12
AUDIO SELECT
CAMERA
A/V
MEMORY
VIEWER
VCR MODE
REC MODE
PHOTO SEARCH
PHOTO COPY
AUDIO MODE 12
SOUND1
AUDIO SELECT
WIND CUT
A / V SET