Filter
Top Products
Getting ready to start recording
25
Getting started
INSERTING/EJECTING A MEMORY CARD (NOT SUPPLIED)
1
2
To insert a memory card
1
Press the power button to turn off the product and then slide the
[Open/Close] lever in the direction of the arrow and open the
memory card cover as shown in the figure above.
2
Insert the memory card into the card slot until it softly clicks.
Make sure that the terminals portion of the card is facing left
and the product is placed as shown in the figure.
3
Close the cover, and then slide the [Open/Close] lever in the
direction of the arrow as show in the figure.
•
To eject a memory card
1
Press the power button to turn off the product and then slide the
[Open/Close] lever in the direction of the arrow and open the
memory card cover as shown in the figure above.
2
Gently push the memory card to eject it.
3
Close the cover, and then slide the [Open/Close] lever in the
direction of the arrow as show in the figure.
To avoid the data loss, turn off the product by pressing the [Power ( )] button before inserting or ejecting the memory card.
If you eject the memory card from the product while it is on, the product turns off.
Be careful not to push the memory card too hard. The memory card may suddenly pop out.
•
•
•
Your product supports only micro SD, micro SDHC, and micro SDXC cards.
Card compatibility with the product may vary depending on the manufacturer and the type of memory card.