Filter
Top Products
12 English
FOR CORRECT USE OF YOUR PRINTER
k Maintenance
i Cleaning
1 Turn off the power, and remove the power plug from the power outlet.
2 Use a soft cloth to gently wipe the printer clean.
To remove stains
3 Moisten a cloth with a solution of water and a mild detergent. Wring the cloth out
well before using it to wipe the printer. Follow by polishing with a soft, dry cloth.
4 Remove any dust from the ventilation holes on the front panel
hDust entering the printer from the ventilation holes will adhere to the prints and
diminish their quality.
i Caution
hNever use benzine or thinner to clean the printer, as doing so may cause deforma-
tion or paint peeling. Also, before using a chemically treated dustcloth to clean the
printer, make sure to read all accompanying instructions.
hDo not allow pesticides or flammable substances to come into contact with the
printer or paper tray. Also, do not allow rubber or vinyl objects to contact the printer
for a long period. They may cause deformation, discoloration, or paint peeling.
k When not using the printer for a long period
hRemove the power cord.
However, when the power is interrupted for a long time, the printer functions may
begin to not work properly. Periodically turn on the printer and use it to maintain
the functions.
k Caution concerning condensation
hUsing the printer or card with condensation inside it may damage it.
i If condensation seems likely to form
hPlace the printer in a plastic bag and seal it, and then wait until the printer has
reached the ambient temperature.
i Be careful of condensation under the following conditions
hWhen moving the printer suddenly from a cold place to a warm place.
hWhen the ambient temperature changes drastically, such as when a heater is
turned on to quickly heat the room.
hWhen the printer is placed in the path of cool air from an air conditioner.
hWhen the printer is placed in a location of high humidity.
DVP-P1_E.book Page 12 Wednesday, July 23, 2003 3:20 PM