Filter
Top Products
English 23
SETUP
How to remove the ink ribbon
1 Open the ink ribbon slot cover.
2 Remove the ink ribbon.
1 Lift the lock lever.
2 Lift out the ink ribbon.
CAUTION
Cautions when replacing the ink ribbon
i Do not insert fingers into the ink ribbon slot. Immediately after printing, the inside of
the printer is very hot. If fingers etc. are inserted into the ink ribbon slot, they may get
burned.
i When removing the ink ribbon, take care not damage the ribbon by touching it.
Do not rewind the ink ribbon
i Once used, the ink ribbon cannot be used again even if it is rewound.
2-
2
1
2-
1
DVP-P1_E.book Page 23 Wednesday, July 23, 2003 3:20 PM