Sanyo TP1000 Camcorder User Manual


 
EN-34
Capture Md.
This sets the recording method at the time of capturing images.
Quick Shot
If this function is set to “On”, the camera takes a quick shot without focusing.
* On / Off
Digi. Zoom
This sets whether or not to use digital zoom at the time of photography.
* On / Off
Find Blur
Refer to the section in this manual titled “Find Blur” (page 23) for further details.
Date Print
The date of recording can be printed directly on the still images. This function must be
activated before the image is captured.
* On / Off
Setup
Refer to the section in this manual titled “Setup Menu” (page 38) for further details.
* [ ] Single: Captures one image at a time.
* [ T ] Continuous: Permits continuous capture of up to 3 images.
* [ U ] AEB: Permits 3 consecutive images in the order of standard exposure,
underexposure and overexposure compensation.
* [ - ] Album Shot: Creates an album-like layout to combine 3 shots into a single
image.
* [ / ] Burst: Permits continuous photography while pressing and holding the
shutter button. As long as you hold the shutter button pressed,
images are captured until the memory capacity is exhausted.
* [ . ] Cont.flash: Permits continuous capture of up to 3 images with flash.
* [ + ]
Pre-shot: Lets you capture the background first, then have someone to
capture you in front of it.
* [ , ] Coupl.shot: Uses separate areas to combine two shots. You can include
yourself in the shot.