Filter
Top Products
20
ENFORCER Mini PTZ Camera
SECO-LARM, U.S.A., INC.
PRIVACY ZONE Menu
From DISPLAY SETUP
This menu configures an area of the camera’s field of vision so
that it is covered by a gray mask, hiding it. For instance, this
would be used to cover a neighbor’s window, or a sensitive
window of the office.
Once configured, the gray mas
k automatically appears over that
area every time the camera pans or tilts past it.
MASK NO
1
UNDEFINED
DISPLAY OFF
CLEAR MASK
CANCEL
<EDIT MASK>
PRIVACY ZONE
EXIT
BACK
EDIT MASK Menu
From PRIVACY ZONE
Move the camera to the target area to be masked and choose
NEAR or SAVE. The mask will be displayed as a gray square.
EDIT MASK 1
MOVE TO TARGET POSITION
[NEAR:SAVE /FAR:CANCEL]
Once the mask is displayed:
• Center the camera on the object to be masked.
• Use the joystick or arrow keys to adjust the mask size.
• Select "NEAR" or "SAVE" to save the mask setting.
EDIT MASK 1
[NEAR:SAVE /FAR:CANCEL]
[ ◄►: ADJUST MASK WIDTH]
[ ▲▼: ADJUST MASK HEIGHT]
MASK NO
1~4. Select the mask number. If that mask
was already configured, the camera will
move to the where it was set. Otherwise,
UNDEFINED will be displayed under
MASK NO.
DISPLAY
[ON/OFF] Shows ON if the selected mask
is active, shows OFF if that mask is not
active.
CLEAR MASK
Deletes data in the selected mask.
<EDIT MASK>
See EDIT MASK menu below.