Filter
Top Products
22
ENFORCER Mini PTZ Camera
SECO-LARM, U.S.A., INC.
FOCUS MODE
[AUTO / MANUAL / SEMI-AUTO]
Sets the camera focus mode.
"SEMI-AUTO" mode -- In this mode, the camera switches between the
"manual focus mode" and "auto focus mode" depending on the current
operation of the camera. When the camera moves to a PRESET location, the
focus of the camera changes to the focus that was memorized when the
PRESET was configured ("manual focus mode"). During jog operations, the
camera switches to auto focus ("auto focus mode").
DIGITAL ZOOM
[ON / OFF] Sets the digital zooom function ON or OFF. If set to "OFF" the
maximum zoom of the camera is the optical zoom. If set to "ON" the digital
zoom operates when the optical zoom reaches its maximum setting.
LINE LOCK
[ON / OFF] If set to ON, the camera's line lock sync is synchronized with the
AC power. This function might be used if multiple cameras attached to the
same DVR interfere with each other.
IMAGE FLIP
[ON / OFF] When ON, the camera image flips up-side-down.
<WHITE BALANCE SETUP>
In the manual mode, the red and blue color levels can be configured manually.
See below.
<AUTO EXPOSURE
SETUP>
Configures a variety of lighting settings for the camera. See page 23.
ZOOM CAMERA SETUP Menu
From DOME CAMERA SETUP
FOCUS MODE
SEMI-AUTO
DIGITAL ZOOM
ON
LINE LOCK
OFF
IMAGE FLIP
OFF
<WHITE BALANCE SETUP>
<AUTO EXPOSURE SETUP>
ZOOM CAMERA SETUP
EXIT
BACK
WB SETUP Menu (White Balance)
From ZOOM CAMERA SETUP
This menu allows the red and blue color levels to be adjusted automatically
or manually.
WB MODE
[AUTO / MANUAL] In the manual mode, the red and
blue colors can be individually set.
RED ADJUST
[10~60]
BLUE ADJUST
[10~60]
WB MODE
AUTO
RED ADJUST
_ _ _
BLUE ADJUST
_ _ _
WB SETUP - GLOBAL
EXIT
BACK
This menu configures many of the general functions of the zoom camera module.