Filter
Top Products
VL-A110U/pp. 026-039; 00/11/21/18:00
G. K. Associates, Tokyo
29
Useful Features
Useful Features
Edit Search
The edit search function lets you search,
without switching from Camera mode to VCR
mode, for the point on the tape where you wish
to start recording next.
1 In Recording Standby mode, make sure
that no Operation button indicators are
displayed on the monitor.
• If they are displayed, turn them off by
pressing the DISPLAY button.
2 Press and hold down the Forward Edit
Search button (B) or Reverse Edit
Search button (C).
3 When you find the point where you want
to begin recording, release the button.
Notes:
• The sound is off during search.
• Some picture noise appears during reverse edit
search.
• Forward edit search is performed at the same
speed as normal playback, and reverse edit
search at three times the normal playback
speed.
DISPLAY button
Forward Edit Search button
Reverse Edit
Search button
Forward edit
search
Reverse edit
search
Quick Return
When you have been playing back what you
have recorded, and wish to quickly return to
recording again from the end of the last
recorded scene, use the quick return function.
1 In Recording Standby mode, press the
MENU button until
appears.
2 Press the RETURN button (D).
•“QUICK RETURN” flashes, and the tape
will begin fast forwarding or rewinding to
the end of the last recorded scene.
When the tape reaches the end of the last
recorded scene, the VIEWCAM enters the
Recording Standby mode.
Notes:
• To cancel the quick return function, press the
RETURN button again in step 2.
• If the cassette has been removed since the last
recording, if no recording has been made since
the cassette was loaded, or if the power source
has been interrupted, the RETURN button
indicator will not appear and the quick return
function cannot be used.
TLE
TI
-
TURN
RE
-
16 9
MENU
SCENE
TURN
RE
-
TLE
TI
-
TURN
RE
-
16 9
MENU
SCENE
QUI CK RETURN