Filter
Top Products
105
FILE NUMBERING SYSTEM
Stored data is automatically assigned file numbers from 0001 to 9999. When
data is being reviewed, the file number of each image is displayed in the right
corner on the color LCD monitor (see P.70, 75). The file number is also
incorporated into the filename of the image. The filename consists of “SDIM”
followed by the 4-digit file number and extension. For example: image number
0023 will be stored in the file SDIM0023.X3F. All DP1 image files will be stored
in the / ###SIGMA folder on the card.
File numbering can be continuous, or can be reset every time an empty card is
detected. Use the Camera Set-up menu to set the file numbering system.
FILE NUMBERING OPTIONS
OPTION DESCRIPTION
Continuous
(Default)
Numbering is continuous. The first file number assigned on an
empty card will be one higher than the last assigned number.
(If the inserted card contains DP1 images with file numbers
greater than the last assigned number, file numbering will
continue with one higher than the highest file number on the
card.)
Auto Reset
Each time an empty card is inserted, or all images on the
current card are deleted, the file number will reset to its default
value of 0001. (If the inserted card already contains DP1
images, the file number will not be reset).
SETTING THE FILE NUMBERING SYSTEM
1
Remove the lens cap and turn the camera on.
2
Press the button.
3
To open the [ Set Up] menu, press the button.
4
Use the buttons to select the [File Numbering] menu and press the
button.
5
Use the buttons to select numbering system.
6
Press the button or the button to apply the setting or the button
to close the sub-menu without making any changes.