Sigma DP1 Digital Camera User Manual


 
62
TIP
Three frames will be taken continuously by pressing the shutter button.
When the Drive Mode is set to the Self Timer, only 1 frame will be taken
each time the shutter button is pressed.
If the [Quick Preview] in the [ Set Up] menu is set to other than [Off],
three images can be viewed at a time. It is easy to check the exposure
difference between the images.
WARNING !!
Once you set the auto bracketing mode, the camera will continuously hold
that auto bracketing mode until you set the bracketing amount to “0.0”.
Auto Bracketing functuion cannot be used with the flashgun. When the
built-in flashgun is poped up, the Auto Bracketing function will be turned off.
Auto bracketing icon will change as follows depending on the frame number.
First Frame Second Frame Third Frame
Auto Bracketing mode can be used in combination with Exposure
Compensation.
You can take pictures with Auto Bracketing mode based on a compensated
exposure, which you set.
To do so, please set both the Auto Bracketing mode and Exposure Compensation
mode as desired.
The combined value (Exposure Compensation and Auto Bracketing) will be
indicated on the viewfinder display.
Example
Exposure Compensation +1.7 with Auto Bracketing amount 1.0
First Frame
+
1.7 (Exposure compensation +1.7 & no shift value)
Second Frame
+
0.7 (Exposure compensation +1.7 & shift value -1.0)
Third Frame
+
2.7 (Exposure compensation +1.7 & shift value +1.0)