Sigma DP1 Digital Camera User Manual


 
94
z Video recording mode employs Pan Focus (focus is fixed).
z If the distance between the camera and the subject is 30cm to 50cm, press the
button to set the close-up mode. (The icon is displayed in the left of
the color LCD monitor.)
z It is possible to use the digital zoom during recording (P.64).
z It is possible to change the white balance setting (P.50 - 52).
The recording capacity of cards is as shown below.
512MB 1GB 2GB 4GB
15 min 30 min 60 min 120 min
WARNING !!
The camera’s operation sound might be recorded while shooting the movie.
The available recording time is dependent on the size of the SD card used. It
is also possible that recording might be terminated during shooting due to
the capacity of the card in use.
The maximum recording data size for one movie shoot is 2GB. The
recording will be terminated automatically when the recording data size
exceeds 2GB.
The recording will be terminated when the battery power is insufficient.
The remaining time display might not change constantly because it is
calculated from the capacity of the card while shooting.
The remaining time display can show a maximum of 99 min. 59 sec. If a
large capacity card is used, the remaining time counter will not change from
99:59 until the recording time is 99min: 59 sec. or less.
Custom white balance cannot be captured in Movie Mode. If you wish to
use custom white balance, please capture it in still image mode and then
change the camera back to Movie Mode.
PLAYING BACK MOVIES
How to playback movies.
1
When movie playback is selected, the first one frame of the movie is
displayed as a still picture. The control icons are displayed on the bottom
right of the movie playback screen.