Filter
Top Products
Appendix 127
Appendix
Warning System
When the camcorder is powered on, or if a fault occurs
during operation, a warning is given in the following
ways:
• By warning indications in the display window.
• By means of the WARNING indicator together with
a warning tone from the speaker or earphone.
• By the warning indicators in the viewfinder.
You can adjust the volume of the warning tone with
the ALARM knob. When this knob is turned to the
minimum position, there is no sound output at all.
Operation warnings and action to be taken
Display window
Continuous
1 blink/s
4 blinks /s
WARNING indication
Warning tones
Continuous
1 beep/s
4 beeps /s
Viewfinder indicators
REC/TALLY
Continuous
4 blinks/s
1 blink/s
BATT
Problem
Machine
action
What to do
State
(blinking/
Continuous)
Warning
indica-
tion
Video head
gaps
clogged or
problem in
recording
circuit.
After detecting
head clogging,
recording
continues but
quality is poor.
Clean the
heads. If the
problem
persists, power
off, and consult
your Sony
dealer.
Continuous
a)
RF
a)
a)
a)
Servo lock
lost.
Recording
continues but
quality is poor.
This may
temporarily blink
when the
recording starts.
Power off, and
consult your
Sony dealer.
SERVO Continuous
a)
a)
a)
a)
Condensa-
tion on
head drum.
The VCR
stops, and all
operations are
inhibited
except eject.
Without
powering off,
wait until the
HUMID
indication
disappears.
HUMID Continuous
The tape
cannot be
wound
properly.
Operation
stops.
Consult your
Sony dealer
before doing
anything.
d)
SLACK
Continuous
Close to
the end of
tape.
Operation
continues.
Replace the
cassette as
soon as
possible.
Blinking
a)
(1 blink/s)
a)
c)
c)
End of
tape.
Operation stops
during recording,
playback or fast
forward.
Replace the
cassette or
rewind.
Blinking
(4 blinks/s)
TAPE
Battery
almost
exhausted.
Operation
continues.
Replace the
battery as
soon as
possible.
Blinking
(4 blinks/s)
BATT
Blinking
(1 blink/s)
b)
Battery
exhausted.
Operation
stops.
For details of warning messages displayed in the viewfinder,
see page 77.
a) During recording or at recording pause.
b) Except during playback, fast forward, rewind, and
recording review
c) During recording only
d) Do not operate the camcorder with “SLACK” indication
displayed or the tape may be damaged.
b) c)
(Blinking in
reverse phase)
Replace the
battery.