Filter
Top Products
96 Chapter 4 Viewfinder Screen Indications and Menus
Chapter 4 Viewfinder Screen Indications and Menus
Changing File Settings
When using advanced menu page 11 or 12, you can
change the settings about picture quality in setup files.
(In basic menu page 1, a part of items are changeable.)
The changes are accepted only until another file is
called up, after which the original settings are restored.
If you save the changes, store the modified file as one
of the user files or record it in a cassette. (See the
following section “Saving File Settings”.)
1 Perform the steps described in “To call up files
recorded onto a tape” on page 95 to call up the
selected file.
2 Access advanced menu page 11 or 12.
a) An asterisk (*) appears in front of any factory preset file
whose contents have been revised at least once.
3 Make the desired changes.
Page 11
Currently
selected file
a)
Currently
selected file
a)
Item
Settings
M.BLACK, STRETCH and
DTL LEV
See “Basic menu page 1”
(page 80).
M.GAMMA
Adjusts the gamma curve.
–99 to ±0 (normal value) to
+99
V DTL LEV
Adjusts the vertical detail.
–99 to ±0 (normal value) to
+99
DTL FREQ
Adjusts the central frequency
of the detail.
LL, L, M (normal value), H,
HH
Page 12
Saving File Settings
Files whose settings have been changed for certain
shooting conditions can be saved as a user file or onto
a tape.
For details, see “To save setup files to a tape” (page 97).
1 Set the SETUP switch to FILE.
2 Call up a setup file whose settings approximate the
desired shooting conditions and then change some
of the settings.
For details of this operation, see “Calling up a Setup
File” (page 94), “Changing File Settings” above,
“Basic Menu Operations” (pages 80 to 84), and
“Advanced Menu Operations” (pages 86 to 92).
Item Settings
SAT
Adjusts the saturation of the
image.
–99 to ±0 (normal value) to
+99
Negative adjustment values
decrease the saturation and
positive adjustment values
increase the saturation.
HUE
Adjusts the hue of the
image.
–99 to ±0 (normal value) to
+99
SKIN SAT
Adjusts the saturation in the
specified area of the image.
–99 to ±0 (normal value) to
+99
Negative adjustment values
decrease the saturation and
positive adjustment values
increase the saturation.
SKIN HUE
Adjusts the hue in the
specified area of the image.
–99 to ±0 (normal value) to
+99
SETUP switch
m
PAGE11(NEXT
m
$
PREV
m
4
)
FILE ADJ 1
FILE:*HISAT
M.BLACK : ± 0
STRETCH : ± 0
M.GAMMA : ± 0
DTL LEV : +10
V DTL LEV: -10
DTL FREQ : M
EXIT MENU (YES
m
PUSH)
m
PAGE12(NEXT
m
$
PREV
m
4
)
FILE ADJ 2
FILE:*HISAT
SAT : ± 0
HUE : ± 0
SKIN SAT: ± 0
SKIN HUE: ± 0
EXIT MENU (YES
m
PUSH)
Setup Files