Filter
Top Products
Chapter 2 Fitting and Connections
Chapter 2 Fitting and Connections 35
Fitting the 4-inch/5-inch Electronic Viewfinder
You can fit the optional DXF-51 (5-inch)/DXF-41 (4-inch) Electronic Viewfinder. To fit, the following parts are
required.
Required parts to fit
Name Part No.
Accessory Shoe Kit A-8274-968-B
Adaptor cable (8-pin y 20-pin) 1-783-665-11
(DXF-41 only)
For details, consult your Sony dealer.
How to fit
Remove the cover of the grip and attach the shoe and
stopper screw (accessory shoe kit).
Fitting to a Tripod
First fit the VCT-U14 Tripod Adaptor to the tripod, then mount the camcorder on the tripod adaptor.
Note
After removing the camcorder, if the tripod adaptor pin
has not returned to its original position, hold down the
red button and move the lever in the direction of the
arrow to return the pin to its original position. It is not
possible to mount a camcorder with the pin left out.
VCT-U14 Tripod Adaptor
Side the camcorder forward
along the slot, until it clicks
firmly into place.
Tripod
Hold down the red button
and pull the lever in the
direction of the arrow.
Pin
VF Cable
Guide
Fixing ring
Shoe*
Stopper
screw*
Adaptor cable (8-pin y 20-pin)
20-pin
8-pin
• Supplied with the Accessory Shoe Kit
Removal