Filter
Top Products
Operations
Recording the Camera Image (Manual Recording) / Playing Back Recorded Images
17
Recording the Camera
Image (Manual
Recording)
You can record the current images during monitoring or
take a snapshot.
This section explains how to record manually using the
buttons on the Recorder toolbar.
For a scheduled recording, see “Scheduling Recordings”
on page 30.
Recording Using the Recorder
Toolbar
To display or hide the Recorder toolbar, click the
(Toggle Recorder Toolbar) button on the main toolbar.
Record: Click the button to start recording.
Stop: Click the button to stop recording.
Snapshot: Click the button to take a snapshot
of the current image and store it in the bmp
(bitmap) format.
Tips
• The recorded images and snapshots are stored in the
previously specified location of the computer.
For specifying the storage location, see “Assigning a
Storage Location” on page 29.
• To search for a record, see “Searching for Recordings”
on page 17.
Playing Back Recorded
Images
You can search for recorded data and view playback
either in the preview window of the Search Recording
window or in the monitor window of the main window.
Searching for Recordings
For searching for a file of recorded data, use the Search
Recording window.
To display the Search Recording window, click the
(Search Recording) button on the main toolbar.
Notes
• To view the playback image on the monitor window,
you need to click on the monitor window to select it
(to be framed in yellow) before displaying the Search
Recording window. If it is not selected, the located
recording will not be displayed in the monitor
window.
•When the Search Recording window is displayed, the
audio of the image displayed in the monitor window of
the main window cannot be heard. Only the audio of
the image being played back in the Search Recording
window is heard.
• Snapshots cannot be searched for.
Search Recording window
1 Search Recording toolbar
The buttons on this toolbar are used to search for
recordings.
View Recording TimeLine
2
1
4
3
5