Filter
Top Products
Introduction
Features / System Configuration
4
Introduction
Features
Network Camera Recorder is software exclusively
designed for use with Sony SNC-M1/M1W/M3/M3W
Network Cameras. Network Camera Recorder allows
you to monitor images of the cameras, record them and
play back the recorded data.
Monitoring of up to four cameras
This application allows simultaneous viewing of up to 4
cameras, as well as recording and playback. It also
provides for the control of the pan/tilt, and digital zoom.
Additionally, monitoring of the audio from the built-in
or connected microphone is possible.
Recording of camera image
This application allows recording of the image as well as
audio from the camera. A recording schedule can be set
by day, or by week at preset times, on each camera.
Playback of recorded data
This application allows various playback modes of the
recorded data, such as fast-forward, rewind, frame
playback, slow playback and cue to the point where
playback started.
System Configuration
Cameras are connected to a network and controlled by a
computer with Network Camera Recorder installed.
Note
Do not access the camera via Network Camera Recorder
or the Web browser while it is accessed by another
Network Camera Recorder.
Network Camera
Recorder
LAN
Network Camera
SNC-M1/M1W/M3/M3W
Computer
Wired or
wireless*
Router or Hub
* Wireless LAN connection is available for the SNC-M1W and
SNC-M3W only.
Internet
Network Camera
Recorder
Computer
Network Camera
SNC-M1/M1W/M3/M3W
Internet