Filter
Top Products
You can use th_s camcorder as a VCR by connecting it directly to your TV for playback.
After you connect this camcorder to your TV, use the Remote Commander for convement
control of the camcorder.
Use the supphed RFU adaptor to connect your camcorder to your TV. Before connechng,
make sure that the TV tsturned off to prevent speaker damage. If your TV has audio/
video inputs, see page 33.
_ _IN_J VHF
ANT
OUT
:{FU-90UC
F A ' VlD'EOouT ....
tRFUDC OUT _ I
I I AUDIO OUT c"A_e_°_'v,_o"c.... I
14_J,I Channel selector
3
Note
To connect your camcorder to a TV that is already connected to a regular TV (VHF)
antenna, you need to:
1 Unplug the antenna cable from your TV first.
Plug in the tail end of the RFU adaptor marked OUT to the antenna input of your TV.
Re-wire the antenna cable you unplugged to the RFU adaptor jack marked ANT. This
way, you can switch between TV broadcasting and your home video playback without
re-wiring
2 Connect the RFU adaptor to the camcorder.
3 Connect the AC power adaptor to a wall outlet.
4 Set the channel selector on the RFU adaptor (and your TV channel) to 3 CH or 4 CH of
the VHF channel, whichever is not active (vacant) in your area.
5 Attach the connecting plate of the AC power adaptor to the camcorder.
6 Make sure the CHARGE/VTR selector on the AC power adaptor is set to VTR pos_t_on.
When you want to sw_tch to a reguler TV program, set the CHARGE/VTR selector to OFF or turn off
the power on the camcorder
Bas,c Camera Operatron 17