Filter
Top Products
How to edit
Insert a tape to be recorded into recording VCR.
Slide EDIT on the camcorder to the direction of the arrow.
EDIT ,-=.
Set the POWER switch of the camcorder to PLAYER, then insert the
recorded tape.
Play back a tape on the camcorder until you locate the point where
you want to start editing, then press II PAUSE to set the camcorder to
the playback pause mode.
On the recording VCR, locate the recording starting point and set the
VCR to the recording pause mode.
Press U PAUSE on the camcorder and VCR simultaneously to start
editing.
I
Editing more scenes
Repeat steps 4 to 6.
To stop editing momentarily
Press II PAUSE on the recording VCR.
To stop editing
Press [] STOP on both VCRs.
If you use the DATA SCREEN function
The indicators d=splayedon the TV screen willalso be recorded. If you don't want to
record these indicators, press DATASCREEN on the Commander.
Using of the EDIT switch
When you set EDIT to the direction of the arrow (EDIT ON), you can keep picture and
sound deteriorations resulting from editing to the minimum. Avoid using the edited tape for
multiple generations of editing. After editing, be sure to set thisswitch in the opposite
direction of the arrow (EDIT OFF).
8 Advanced Camera Operation