Filter
Top Products
On operation
Operate the camcorder on 6.0 V (battery pack) or 7.5 V (AC power adaptor).
For DC or AC operation, use the accessories recommended in this manual.
Should any solid object or liquid fall into the casing, unplug the camcorder and have it
checked by qualified personnel before operating it any further.
• Do not hold the camcorder by the viewfinder or the microphone.
• Avoid rough handling or mechanical shock. Be particularly careful of the lens.
• Keep the lens cap on the lens when not using the camera.
• Do not wrap up the camcorder and operate it since heat may build up internally.
• Keep the camcorder away from strong magnetic fields or mechanical vibration.
• Do not let sand get into the camcorder.
When you use the camcorder on a sandy beach ordusty place, protect itfrom the sand
or dust. Sand or dust may cause the camcorder to malfunction and sometimes the
malfunction cannot be repaired.
• Do not let the camcorder get wet.
Keep the camcorder from rain or sea water. It may cause malfunction and sometimes
the malfunction cannot be repaired.
On care
• When the unit willnot be used for a long time, disconnect the power source and remove
the tape. Periodically turn on the power, operate the camera section and player section
and play back a tape for about 3 minutes.
• Clean the lens with a soft brush to remove dust. If there are fingerprints on it, remove
them with a soft cloth. Clean the camcorder body with a dry, soft cloth, or a soft cloth
lightly moistened with a mild detergent solution. Do not use any type of solvent which
may damage the finish.
Additional Information 43