Filter
Top Products
Administrating the Camera
Configuring the System — System Menu
34
Alarm buffer
Displays the Alarm buffer menu for the buffer for
storing the image and audio related to alarm detection.
(“Setting the Alarm Buffer — Alarm buffer Menu” on
page 90)
Event detection
Displays the setting menu for all built-in detection
functions. (“Setting the Sensor input/Camera tampering
detection/Motion detection/Audio detection — Event
detection Menu” on page 91)
Viewer
Displays the Viewer menu from which you can select the
viewer to use and configure advanced settings.
(“Configuring the Viewer — Viewer Menu” on page 98)
Configuring the System
— System Menu
When you click in the Administrator menu,
the System menu appears.
Use this menu to perform the principal settings of the
software.
The System menu has seven tabs: System, Date & time,
Superimpose, Installation, Initialize, System log and
Access log.
System Tab
Title bar name
Type a name of up to 48 characters to be displayed on the
title bar. The characters typed here are displayed on the
title bar of the Web browser.
Serial number
The serial number of the camera is displayed.
Software version
The software version of this camera is displayed.
Exclusive control mode
Controls the authority to operate pan, tilt, zoom and
some other functions of the camera.
On: Only one user has control authority. Set the
operation time for one user in Operation time.
If a user tries to operate a function during operation
by another user, the authority is controlled by the
settings of Operation time and Maximum wait
number.
Off: Multiple users can control pan, tilt and zoom at the
same time. When multiple users control these
functions at the same time, the last operation has
priority.
Operation time
Sets the time length for a user who has control authority.
The selectable range is from 10 to 600 seconds. This is
effective when Exclusive control mode is set to On.
System