Filter
Top Products
111
Additional information Дополнительная информация
Cause and/or corrective actions
• Moisture condensation has occurred.
m Remove the cassette and leave the camcorder for at least 1 hour.
(p. 100)
• The video heads are dirty.
m Clean the heads using the Sony DVM12CL cleaning cassette (not
supplied). (p. 101)
• A serviciable situation not malfunctioned above has occurred.
m Remove the cassette and insert it again, then operate the
camcorder. (p. 12)
m Disconnect the mains lead of the AC power adaptor or remove
the battery pack. After reconnecting the power source, operate
the camcorder.
• The battery pack being used is not the “InfoLITHIUM” battery pack.
m Use the “InfoLITHIUM” battery pack. (p. 31)
• A camcorder malfunction which you cannot service has occurred.
m Contact your Sony dealer or local authorized Sony service
facility and inform them of the five digits. (example: E:61:10)
Five-digit display
C:21:ππ
C:22:ππ
C:31:ππ
C:32:ππ
C:04:ππ
E:61:ππ
E:62:ππ
English
Self-diagnosis function
If you are unable to resolve the problem, contact your Sony dealer or local authorized Sony service
facility.
The camcorder has a self-diagnosis display.
This function displays the camcorder’s condition
with five digits (a combination of a letter and
figures) on the LCD screen or in the viewfinder.
If this occurs, check the following code chart. The
five-digit display informs you of the camcorder’s
current condition. The last two digits (indicated
by ππ) will differ depending on the state of the
camcorder.
LCD screen/viewfinder
Self-diagnosis display
•C:ππ:ππ
You can service the camcorder yourself.
•E:ππ:ππ
Contact your Sony dealer or local
authorized Sony facility.
C : 21: 00