Filter
Top Products
74
You can copy still images recorded in the built-in flash memory and record them to a
tape.
Before operation
Insert a tape for recording.
(1) Set the POWER switch to VTR.
(2) Using the tape transport buttons, search a point where you want to record the
desired still image. Set the tape to the playback pause mode.
(3) Press r REC to set the tape to the recording pause mode.
(4) Press PLAY to play back the still image you want to copy.
(5) Press P to start recording and press P again to stop.
(6) If you have more to copy, repeat steps 4 and 5.
To stop copying midway
Press p.
During copying
You cannot operate the following buttons:
MEMORY PLAY, MEMORY INDEX, MEMORY DELETE, MEMORY +, and
MEMORY –.
Copying images recorded in the built-in
flash memory to tapes
4
1
POWER
OFF
VTR
CAMERA
PLAY
2
3
5
PAUSE
REC