Filter
Top Products
79
Customizing Your Camcorder
Changing the MENU settings
Icon/item
CONTINUOUS
QUALITY
FLD./FRAME
PROTECT
SLIDE SHOW
DELETE ALL
FORMAT
PHOTO SAVE
Mode
r OFF
ON
MULTI SCRN
r STANDARD
FINE
r FIELD
FRAME
r OFF
ON
Meaning
Not to store continuously
To record 3 or 4 pictures continuously
To record 9 pictures continuously
To record still pictures in the standard image
quality mode
To store still pictures in the fine image quality
mode
To record moving subjects
To record stopping subjects in high quality
Not to protect still pictures
To protect selected still pictures against
accidental erasure. (p. 70)
To play back images in a continuous loop.
(p. 69)
To delete all the images (p. 72)
To format the built-in flash memory
To duplicate still pictures (p. 63)
*These items are displayed only when the STANDBY switch is set to MEMORY.
Notes on FORMAT
Format (initialize) the built-in flash memory when the warning indicator flashes
fast.
To format (initialize) the built-in flash memory, carry out the following operation.
(1) Set the POWER switch to CAMERA or VTR. When you set the POWER switch
to CAMERA, turn STANDBY to MEMORY.
(2) Press MENU to display the MENU settings.
(3) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select FORMAT, then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select OK, then press the dial.
To cancel formatting, select RETURN, then press the dial.
•Formatting erases all information in the built-in flash memory, including the protected
image data. Check the contents of the flash memory before formatting.
•Be sure that the battery pack is fully charged when formatting the built-in flash
memory.
Formatting takes about three seconds.
•Do not turn the POWER switch or press any button while the display shows
“FORMATTING”.
POWER
switch
CAMERA*
VTR
CAMERA*
CAMERA*
VTR
CAMERA*
VTR
CAMERA*
VTR
CAMERA*
VTR
CAMERA*