Filter
Top Products
78
Changing the MENU settings
Icon/item
HiFi SOUND
AUDIO MIX
PB MODE
LCD B. L.
LCD COLOR
VF B. L.
Mode
r STEREO
1
2
r AUTO
H/h
r BRT NORMAL
BRIGHT
r BRT NORMAL
BRIGHT
Meaning
To play back a stereo tape or dual sound track
tape with main and sub sound
To play back dual sound track tape with main
sound
To play back a dual sound track tape with sub
sound
To adjust the balance between the stereo 1 and
stereo 2
To automatically select the system (Hi8/
standard 8 or Digital8) that was used to record
on the tape, and play back the tape
To play back a tape that was recorded in the
Hi8/standard 8 system when your camcorder
does not automatically distinguish the
recording system
To set the brightness on the LCD screen normal
To brighten the LCD screen
To adjust the color on the LCD screen, turn and
press the SEL/PUSH EXEC dial
To set the brightness in the viewfinder normal
To bright the viewfinder
POWER
switch
VTR
VTR
VTR
VTR
CAMERA
VTR
CAMERA
Notes on AUDIO MIX
•You can adjust the balance only for tapes recorded in the Digital8 system.
•When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance .
Note on PB MODE
The mode will return to the factory setting when:
•you remove the battery pack or power source.
•you turn the POWER switch.
Notes on LCD B. L. and VF B. L.
•When you select “BRIGHT”, battery life is reduced by about 10 percent during
recording.
•When you use power sources other than the battery pack, “BRIGHT” is automatically
selected.
To lighten
To darken
VTR
CAMERA
ST1 ST2