Filter
Top Products
113
Using your computer
Copying images to your computer using the
“Picture Motion Browser”
1 Insert a “Memory Stick Duo” with
recorded images into the camera.
• When copying images in the internal
memory, this step is unnecessary.
2 Insert the sufficiently charged
battery pack into the camera, or
connect the camera to a wall
outlet (wall socket) with the AC
Adaptor (not supplied) and the
USB/AV/DC IN cable for multi-use
terminal (not supplied).
• When you copy images to your computer
using a battery pack with little remaining
charge, copying may fail or image data may
become corrupted if the battery pack shuts
down too soon.
3 Turn on the computer, then press
the (Playback) button.
“Connecting...” appears on the screen of the
camera.
When a USB connection is established for
the first time, your computer automatically
runs a program to recognize the camera.
Wait for a while.
• If “Mass Storage” does not appear, set [USB
Connect] to [Mass Storage] (page 96).
Preparing the camera and the
computer
(Playback) button
Connecting the camera to your
computer
* is displayed on the screen during the
communication session.
Do not operate the computer while the indicator
is displayed. When the indicator changes to
, you can start using the computer
again.
Cable for
multi-use terminal
1 To a USB jack
2 To the multi connector
Access
indicators*