Filter
Top Products
18
Inserting and removing a “Memory Stick”
, Slide the lock switch and the
OPEN button in the direction of
the arrow and open the
waterproof cover.
The waterproof cover opens toward you.
• Before opening the waterproof cover, be
sure to rinse off any sand and
completely wipe away any water that
may be present on the camera body.
• Never open the waterproof cover underwater or
in places exposed to water, as this may allow
water to enter the inside of the camera and
cause a malfunction.
• Immediately after the camera is brought from a
warm place to a cold place such as from
indoors to outdoors, the difference in pressure
between the inside of the camera and the
outside air may make it difficult to open the
waterproof cover.
, Slide the inner cover in the
direction of the arrow to open
it.
The inner cover opens toward you when
you slide it in the direction of the arrow.
• For details on the “Memory Stick,” see page 76.
, Insert the “Memory Stick.”
Holding the “Memory Stick” as shown in
the illustration, insert it all the way in until
it clicks.
• Push the “Memory Stick” all of the way in so
that it is securely seated in the connector. If the
“Memory Stick” is not inserted correctly, you
may not be able to record or display images in
the “Memory Stick.”
• Be careful not to drop the batteries when
opening or closing the inner cover.
1
2
3
Label side
Terminal side
Shooting still image
s