Filter
Top Products
17
Before you begin
Attaching optional accessories
Attaching digital camcorder to the tripod adaptor
Use the VCT-U14 tripod adaptor (not supplied). Once the tripod adaptor has been
attached to the tripod stand, then you may attach the digital camcorder.
(1) Attach the tripod adaptor to the tripod.
(2) Attach the digital camcorder to the tripod stand’s grooved surface [a], and
slide it forward until you hear a click.
Select a balanced and secure position for the tripod stand.
1
2
[a]
Note on tripod attachment pin
If the tripod attachment pin [c] does not return after removing the digital camcorder,
press the red button on the release lever, and while holding, move the lever in the
direction of the arrow and the pin returns to its original position. If the pin is not set in
its original position you will not be able to reattach the digital camcorder.
[c]
To remove the digital camcorder from the tripod
Press the red button on the release lever [b], and while holding, move the lever in the
direction of the arrow to release the lock.
[b]