Filter
Top Products
36
CAMCORDER
VTR
STOP REW PLAY FF PAUSE
REC
1
2
3
4
POWER
OFF ON
Playing back a tape
You can monitor the playback picture in the viewfinder. You can also monitor the
picture on a monitor screen, after connecting the digital camcorder to a monitor or VCR.
(1) Set the POWER switch to ON.
(2) Set CAMCORDER/VTR to VTR.
(3) Insert the recorded tape with the window facing out.
(4) Open the cover, then press · to start playback.
To stop playback, press π.
To rewind the tape, press 0.
To fast-forward the tape rapidly, press ).
To monitor the sound while viewing the playback picture in
the viewfinder
Connect headphones (not supplied) to the 2 jack or turn on the built-in speaker by
setting SPEAKER to ON.
Using the Remote Commander
You can control playback using the supplied Remote Commander. Before using the
Remote Commander, insert the size AA (R6) batteries.
Note on the DISPLAY button on the remote commander
Press DISPLAY to display the screen indicators on the monitor screen. To erase the
indicators, press DISPLAY again.