Filter
Top Products
106
Jumping to a File-Related Menu Page When Inserting a “Memory Stick”
Chapter 6 Saving and Loading User Setting Data
• To load the scene file saved in the camcorder memory
when the “Memory Stick” is inserted, return to the P00
SCENE RECALL page and load the desired scene file in
the camcorder memory.
• When there is no file to be loaded (shown as “NO
FILE”), an existing file of the same number is
unaffected. In the example shown in step 3, MEM(3) is
not overwritten.
6-2-3 Resetting the Settings of the
Camcorder to the Standard Settings
Saved in the Reference File
You can reset the settings of the camcorder to the settings
saved in the reference file (standard settings).
For details about the items in the reference file, refer to the
Maintenance Manual.
On the SCENE FILE page, turn the MENU knob to move
the
b mark to “STANDARD,” and press the MENU knob.
The s displayed on the left of STANDARD changes to x.
When x changes to s, the settings of the camcorder are
reset to the settings saved in the reference file.
If you press the MENU knob again while x is displayed,
the operation is cancelled and the camcorder returns to the
settings before STANDARD was selected.
6-3 Jumping to a File-
Related Menu Page When
Inserting a “Memory
Stick”
A “Memory Stick” enables you to save user files, scene
files, lens files, reference files and “ALL” files. The
camcorder menu system allows you to make a setting so
that when a “Memory Stick” holding these files is inserted
while in menu operating mode, a menu page relating to the
desired file is automatically displayed on the screen. Thus
you can proceed to file operation quickly. This is very
convenient especially when you manage data files using
“Memory Sticks.”
The page to be displayed can be selected on the MEMORY
STICK page of the FILE menu.
To make this setting, proceed as follows:
1
In the TOP menu, select the FILE menu.
2
Turn the MENU knob until the MEMORY STICK
page of the FILE menu appears, then press the MENU
knob to select the page. Alternatively, on the
CONTENTS page select MEMORY STICK.
MEMORY STICK page
3
Turn the MENU knob to move the b mark to “M.S. IN
> JUMP TO,” and press the MENU knob.
The
b mark on the left of “M.S. IN > JUMP TO”
changes to a z mark, and the z mark on the left of the
setting changes to a ? mark.
4
Turn the MENU knob to select the desired setting
(target FILE menu page).
F04 SCENE FILE
s
1 :SCENE 25
s
2 :SCENE 26
s
3 :SCENE 27
s
4 :SCENE 28
s
5 :NO FILE
x
STANDARD
SCENE RECALL : EXEC
SCENE STORE : EXEC
F.ID: SCENE21
TOP
Setting Description
OFF Disables this function.
USER Jumps to the USER FILE page.
ALL Jumps to the ALL FILE page.
SCENE Jumps to the SCENE FILE page.
LENS Jumps to the LENS FILE 1 page.
F09 MEMORY STICK
M.S. FORMAT : EXEC
M.S. IN > JUMP TO: OFF