Filter
Top Products
150
Menu List
Appendixes
M15 FUNCTION 3 WHT FILTER INH OFF/ON OFF Turns on and off the function which inhibits
independent white memory for each filter
position.
COLOR BAR SEL SMPTE/EBU/SNG SMPTE
(DVW-
970)
Selects the color bar type.
EBU
(DVW-
970P)
REC TALLY UPPER/BOTH UPPER Selects whether to light the upper tally
indicator only, or both upper and lower tally
indicators.
COLOR VF INPUT COMP/VBS/BOTH COMP For video input selection when a color
viewfinder is used
USER & ALL ONLY OFF/ON OFF Selects whether to show only USER, USER
MENU CUSTOMIZE, and ALL menus in the
top menu.
RM COMMON
MEMORY
OFF/ON OFF Selects whether or not to share settings for
when an RM remote control unit is connected
and when the unit is used alone.
RM REC START RM/CAM/PARA RM Selects which VTR START/STOP buttons (on
the RM, camera, or both) are enabled when
an RM-series remote control unit is
connected.
REC INH. WITH
CCU
OFF/ON ON Selects whether to disable recording
operations when a CCU is connected. A
large viewfinder cannot be used with the OFF
setting.
EXT VTR REC CTL OFF/ON OFF Selects whether to synchronize recording
with an external VTR via a CCZ cable when
the CA-702 is connected.
M16 FUNCTION 4 SET DISP MODE SEC/DEG SEC Selects whether to display the shutter speed
in seconds or degrees.
AWB FIXED AREA OFF/ON OFF Selects whether or not to perform AWB for all
pixels in the rectangular area of 25% by 25%.
M17 GENLOCK GENLOCK OFF/ON ON Turns genlock on and off.
RETURN VIDEO OFF/ON OFF Turns return video on and off.
GL H PHASE (–99 to +99) 0 Adjusts the genlock H phase.
GL SC PHASE (–99 to +99) 0 Adjusts the genlock subcarrier phase.
GL SC 0/180 SEL 0/180 180 For coarse adjustment of the genlock
subcarrier phase.
M18 ND COMP ND OFFSET
ADJUST
OFF/ON — Turns on and off the mode which sets ND
(neutral density) filter color compensation
values.
CLEAR ND
OFFSET
— EXEC Clears ND filter color compensation values.
M19 AUTO SHADING AUTO BLK
SHADING
EXEC EXEC Executes the auto black shooting function.
RESET BLK SHD EXEC EXEC Clears black shooting compensation values.
TEST OUT SELECT ENC/R/G/B ENC Selects the signal output to the TEST OUT
connector.
MASTER GAIN
(TMP)
–3/0/3/6/9/12/18/
24/30/36/42/48 dB
0 dB Temporarily sets the master gain value.
No. Page Item Settings Default Description