Sony EX480CP Camera Accessories User Manual


 
48
Command List
Command List (4/4)
Command Set Command Command Packet Comments
CAM_PrivacyZone SetMask 8x 01 04 76 mm nn mm: Mask Settings
0r 0r 0s 0s FF nn 00: Modify, 01: New
rr: W, ss:H
Display 8x 01 04 77 pp pp pp pp FF Mask Display ON/OFF
pp pp pp pp: Mask Settings (0: OFF, 1: ON)
SetMask Color 8x 01 04 78 pp pp pp pp pp pp pp pp: Mask Color Settings
qq rr FF qq: “0” Color Settings
rr: “1” Color Settings
SetPan TiltAngle 8x 01 04 79 0p 0p 0p Pan/Tilt Angle Settings
0q 0q 0q FF ppp: Pan
qqq: Tilt
SetPTZMask 8x 01 04 7B mm 0p 0p 0p Pan/Tilt/Zoom Settings for Mask
0q 0q 0q 0r 0r 0r 0r FF mm: Mask Setings
ppp: Pan, qqq: Tilt, rrrr: Zoom
Non_InterlockMask 8x 01 04 6F mm mm: Non-Interlock Mask Settings
0p 0p 0q 0q 0r 0r 0s 0s FF pp: X, qq: Y, rr: W, ss: H
GridOn 8x 01 04 7C 02 FF Grid Display On
GridOff 8x 01 04 7C 03 FF Grid/Center Line Display Off
CenterLineOn 8x 01 04 7C 04 FF Center Line Display On
CAM_KeyLock Off 8x 01 04 17 00 FF Camera Control Enable/Disable
On 8x 01 04 17 02 FF
CAM_IDWrite 8x 01 04 22 0p 0q 0r 0s FF pqrs: Camera ID (=0000 to FFFF)
CAM_ExternalLock INT 8x 01 04 55 00 FF Internal mode
Line Lock 8x 01 04 55 01 FF Line Lock mode
CAM_VPhase Stop 8x 01 04 05 00 FF
Up 8x 01 04 05 02 FF
Down 8x 01 04 05 03 FF
Up (Step) 8x 01 04 05 2p FF p=step (1-7)
Down (Step) 8x 01 04 05 3p FF
Reset 8x 01 04 05 40 FF Restore Factory Settings
Direct 8x 01 04 45 00 00 0p 0q FF pq: V-Phase (00-FF)
0 degree 8x 01 04 25 00 FF No Phase Turnover
180 degree 8x 01 04 25 01 FF Phase Turnover
CAM_Alarm On 8x 01 04 6B 02 FF Alarm ON/OFF
Off 8x 01 04 6B 03 FF
SetMode 8x 01 04 6C pp FF PP: Mode Settings
00 Focus Move Detection (The rest position is fixed.)
01 Focus Move Detection (The rest position is reset.)
02 AE Move Detection (The rest value is fixed.)
01 AE Move Detection (The rest value is reset.)
SetDayNightLevel 8x 01 04 6D 0p 0p 0p 0q 0q 0q FF ppp: Day Detect Level Setting
qqq: Night Detect Level Setting
Alarm (Reply) y0 07 04 6B 01 FF Detect Level “Low” t ”High”
y0 07 04 6B 00 FF Detect Level “High” t ”Low”