Filter
Top Products
Getting started
Getting started
19
For DCR-HC40E:
For DCR-HC30E:
* With LCD BACKLIGHT set to ON.
b Notes
• The power will not be supplied from the battery pack
when the AC Adaptor is connected to the DC IN jack
of your camcorder, even if its mains lead is
disconnected from the wall socket.
• The recording and playback time will be shorter
when you use your camcorder in low temperature.
• The CHG (charge) lamp flashes during charging, or
the battery information will not be correctly
displayed in following conditions.
– The battery pack is not attached correctly.
– The battery pack is damaged.
– The battery pack is fully discharged. (For Battery
information only)
Using an outside power source
You can use the AC Adaptor as the power
source when you do not want the battery to
run out. While you are using the AC Adaptor,
the battery pack will not lose its charge even
when it is attached to your camcorder.
PRECAUTION
Even if your camcorder is turned off, AC power
(mains) is still supplied to it while connected to
the wall socket via the AC Adaptor.
Connect your camcorder as shown in
“Charging the battery pack” (p. 16).
Battery pack LCD panel
opened*
LCD panel
closed
NP-FP50
(supplied)
105 120
NP-FP70 225 255
NP-FP90 400 455
Battery pack LCD panel
opened*
LCD panel
closed
NP-FP50
(supplied)
120 140
NP-FP70 255 295
NP-FP90 455 525