![](http://pdfasset.owneriq.net/8/87/8874cb67-a459-4f25-8130-6d812c3f0a16/8874cb67-a459-4f25-8130-6d812c3f0a16-bgc.png)
HVL-MT24AM_GB 2-889-493-01 (1)
12
Checking Batteries
e lamp on the control panel comes on or blinks when the batteries are low.
lamp on
Changing the batteries is
recommended. e ash can still be
used in this state if (Flash-ready
lamp) on the rear of the unit is lit.
Only lamp blinking
Flash cannot be used.
Insert new batteries.
If nothing comes on when the ash ON/OFF button of the macro ash
controller is pressed, check the orientation of the batteries.