Filter
Top Products
HVL-MT24AM_GB 2-889-493-01 (1)
41
Detailed operations
Modeling flash
You can try continuous ash to check for shadows on the subject before shooting.
e ash will re for two seconds at a rate of 40 ashes per second.
1 Press the TTL/M/Test button to turn on the modeling-flash
lamp .
Each time the TTL/M/Test button is pressed to change the TTL and M lamp
be sure to check that the appropriate lamp is on. (See page 33 for the display
sequence.)
2 Press the TEST button (test/modeling flash button) .
Do not press the shutter button while the ash is in use.
e strength of shadows will dier from that during actual photography.
When using the ash in a bright place or outdoors or when using a bounce
ash, shadows are lighter so verication is more dicult.