![](http://pdfasset.owneriq.net/8/87/8874cb67-a459-4f25-8130-6d812c3f0a16/8874cb67-a459-4f25-8130-6d812c3f0a16-bg2e.png)
HVL-MT24AM_GB 2-889-493-01 (1)
46
4 While holding the diffuser by its panel’s top tab, press it
against the face of the twin flash unit.
Press the diuser until it clicks into place.
Notes on using the diffuser
If the arm is set at the 60° position and used with a wide angle lens, the diuser
may appear in the image. It is recommended that you always use the diuser
with the arm set at the 90° position.
e ash output is reduced when using the diuser. See page 28 for TTL ash
metering, or page 38 for manual ash metering.