Filter
Top Products
HVL-MT24AM_GB 2-889-493-01 (1)
45
Detailed operations
2 As illustration, slide the tab through the slot near the clip.
The dimple above the slot should slide fit into the hole in
the tab.
3 Place the four side tabs into the slot on the side of the
diffuser.
On the other side, in the same way, place the four side tabs into the slots.
If it is dicult to assemble the diuser, fold it up and try again.
Note
Do not force or pull hard on the diuser. Do not fold the diuser inside out.
Continuedonthenextpage