Filter
Top Products
HVL-MT24AM_GB 2-889-493-01 (1)
57
Additional Information
Notes on use
While shooting
is ash unit generates strong light, so it should not be used directly in front of
the eyes.
Batteries
Do not store the macro ash controller with the alkaline batteries inside it.
Leakage from the batteries may damage the battery chamber.
Depending on the temperature or storage conditions, the battery level displayed
may be lower than the actual battery capacity. e displayed battery level is
restored to the correct value aer the ash has been used a few times. When
lamp blinks to indicate that the ash cannot be used, pressing the ash
ON/OFF button a number of times may result in restoration of the correct
battery level display. If the battery level is still not restored, replace the battery.
When using lithium batteries, if the batteries become hot due to high
temperature or continuous use, lamp may blink and the ash may not
work for a while. Wait for the batteries to cool down before using the ash again.
Nickel-metal hydride batteries can lose power suddenly. If lamp starts
blinking or the ash can no longer be used while taking pictures, change or
recharge the batteries.
e ash frequency and number of ashes provided by new batteries may
vary from the values shown in the table, depending on the time elapsed since
manufacture of the batteries.
Continuedonthenextpage