Filter
Top Products
HVL-MT24AM_GB 2-889-493-01 (1)
48
Custom setting
e various ash settings can be changed as necessary.
e following three items may be changed.
Time to auto power o (4 minutes/15 minutes/60 minutes/None)
Recording modes in which manual ash may be set
(M mode only/All modes)
Manual-ash power-level steps (1EV increments / 1/2EV increments)
1 Press the flash ON/OFF button for three seconds.
e auto lamp, ash-ON lamp and ash-OFF lamp all come on together, and
the item (time to auto power o) is displayed.
2 Press the A-B button (twin-flash A-B selection button) to
select the item, and press the TTL/M/Test button to select
the desired setting.
Each time the A-B button is pressed, the above three items appear on the
control panel (see following page).