Filter
Top Products
Monitor] function to the desired key.
2. Press the key to which [Deactivate Monitor] was assigned.
Note
Even if you perform [Deactivate Monitor], the backlight of monitor remains on. To turn off
the backlight of monitor, press the FINDER/MONITOR button.
[173] How to Use
Using shooting functions Setting the other functions of this product
Aperture Preview
With the monitor or viewfinder, you may see an image with an aperture that differs from the
shooting result. Since the blurring of a subject changes if the aperture is changed, the
blurriness of the actual picture will differ from the image you were viewing prior to shooting.
While you press and hold the key to which you assigned the [Aperture Preview] function, the
aperture is stepped down to the set aperture value and you can check the blurriness prior to
shooting.
1. MENU → (Custom Settings) → [Custom Key Settings] → set the [Aperture
Preview] function to the desired key.
2. Confirm the image by pressing the key to which [Aperture Preview] was assigned.
[174] How to Use Using shooting functions Setting the other functions of this product
Shot. Result Preview
With the monitor or viewfinder, you may see an image with an aperture that differs from the
shooting result. Since the blurring of a subject changes if the aperture is changed, the
blurriness of the actual picture will differ from the image you were viewing prior to shooting.
While pressing down the key to which [Shot. Result Preview] is assigned, you can check the
image preview with the DRO, shutter speed, aperture and ISO sensitivity settings applied.
Check the shooting result preview before shooting.
1. MENU → (Custom Settings) → [Custom Key Settings] → set the [Shot. Result