3. Check the composition of the image on the smartphone screen, and then press the
shutter button (A) on the smartphone to shoot an image.
Use button (B) to change the [Flash] and [Self-Timer] settings. You can also change
the image saving settings.
Note
This product shares the connection information for [Ctrl w/ Smartphone] with a device that
has permission to connect. If you want to change the device that is permitted to connect
to the product, reset the connection information by following these steps. MENU →
(Wireless) → [SSID/PW Reset]. After resetting the connection information, you must
register the smartphone again.
Depending on future version upgrades, the operational procedures or screen displays are
subject to change without notice.
[228] How to Use
Using Wi-Fi functions Controlling this product using a Smartphone
One-touch connection with an NFC-enabled Android
smartphone (NFC One-touch remote)
You can connect this product and an NFC-enabled Android smartphone with one touch,
without performing a complex setup operation.
1. Activate the NFC function of the smartphone.
2. Switch this product to shooting mode.