Filter
Top Products
(wall socket) to disconnect the power.
When the camera is being used for the first time or when you use a battery pack that has
not been used for a long time, the CHARGE lamp may flash quickly when the battery is
charged for the first time. If this happens, remove the battery pack from the charger and
then re-insert it to recharge.
Do not continuously or repeatedly charge the battery pack without using it if it is already
fully charged or close to fully charged. Doing so may cause a deterioration in battery
performance.
[15] How to Use
Preparing the camera Charging the battery pack
Inserting the battery pack into the camera
How to insert the battery pack into the camera
1. Slide the open lever to open the battery cover.
2. Insert the battery pack while pressing the lock lever (A) with the tip of the battery until
the battery locks into place.
3. Close the cover.