Filter
Top Products
When you turn on the camera for the first time or after you have initialized the functions, the
setting screen for the date and time appears.
1. Set the power switch to ON to turn on the camera.
The setting screen for the date and time appears.
2. Check that [Enter] is selected on the screen, then press on the multi-selector.
3. Select your desired geographic location, and then press .
4. Select a setting item using the up/down side of the multi-selector, then press in the
center.
5. Set [Daylight Savings], [Date/Time], and [Date Format] using the up/down/left/right
sides, then press in the center.
Midnight is indicated as 12:00 AM, and noon as 12:00 PM.
6. Repeat steps 4 and 5 to set other items, then select [Enter] and press in the center.
To cancel the date and time setting procedure, press the MENU button.
Note
This camera does not have a function for inserting the date on images. You can insert the
date on images and then save and print them using PlayMemories Home.
If the date and time setting is cancelled halfway, the setting screen for the date and time
appears every time you turn on the camera.
[26] How to Use
Confirming the operation method Confirming the operation method
Using the multi-selector
You can move the selection frame by pressing up/down/left/right side of the multi-