Filter
Top Products
Off:
Does not use the AF illuminator.
Note
You cannot use [ AF Illuminator] in the following situations:
In movie mode
In [Sweep Panorama] mode
When [Focus Mode] is set to [Continuous AF].
When [Scene Selection] is set to [Landscape], [Sports Action] or [Night Scene].
When [Focus Area] is set to [Wide] or [Zone], the AF range finder frame is indicated by a
dotted line.
The AF illuminator emits a very bright light. Although there is no health hazard, do not
look directly into the AF illuminator at close range.
[83] How to Use
Using shooting functions Adjusting the focus
AF Micro Adj.
Allows you to adjust and register an autofocused position for each lens.
1. Select MENU → (Custom Settings) → [AF Micro Adj.].
2. Select [AF Adjustment Set.] → [On].
3. [amount] → desired value.
You can select a value between −20 and +20. Selecting a positive value shifts the
autofocused position away from the product. Selecting a negative value shifts the
autofocused position closer to the product.
Note
It is recommended that you adjust the position under actual shooting conditions.
When you attach a lens for which you have already registered a value, the registered
value appears on the screen. [±0] appears for lenses for which a value has not yet been
registered.
If [−] is displayed as the value, then a total of 30 lenses have been registered and no new
lens can be registered. To register a new lens, attach a lens for which the registration can
be erased, and set its value to [±0], or reset the values of all the lenses using [Clear].
If you perform [AF Micro Adj.] with lenses other than Sony, Minolta, or Konica-Minolta
lenses, the registered settings for Sony, Minolta, or Konica-Minolta lenses may be
affected. Do not perform [AF Micro Adj.] with an unsupported lens.