Filter
Top Products
[202] How to Use Changing settings Setup menu
PAL/NTSC Selector
Plays back movies recorded with the product on a PAL/NTSC system TV.
1. MENU → (Setup) → [PAL/NTSC Selector] → [Enter]
Note
This function is provided with 1080 50i-compatible devices only. It is not provided with
1080 60i-compatible devices. The 1080 50i-compatible devices have a “50i” mark on the
bottom of the product.
If you insert a memory card that has previously been formatted with the PAL system, a
message telling you that you must re-format the card appears. When you record using the
NTSC system, re-format the memory card or use another memory card.
When the NTSC mode is selected, the “Running on NTSC.” message always appears on
the start-up screen each time you turn the product on.
[203] How to Use
Changing settings Setup menu
Cleaning Mode
Allows you to clean the image sensor.
1. Confirm that the battery has been charged sufficiently.
2. MENU → (Setup) → [Cleaning Mode] → [Enter]
3. Turn off the product following the instructions on the screen.
4. Detach the lens.
5. Push the mirror lock lever (A) and open the mirror.