Sony PCNA-MR10A Security Camera User Manual


 
18
nN
Setting up the hardwareNetwork Media Receiver
Programming the remote control
Your remote control is preprogrammed to control certain TVs. Refer to your TV manufacturer’s code table for more information. The
remote control may not be compatible at all with some TV models, even when the appropriate TV manufacturer code is entered.
If you are using a Sony TV set, you do not need to program the remote control, as it is set by default.
To program the remote control, proceed as follows:
1 Press and hold the SELECT button.
2 Enter your TV code number, using the channel number buttons.
3 Release the SELECT button after you have entered the TV code number.
After replacing the batteries in your remote control, the TV manufacturer’s code may require resetting. Reset the code each time you replace the batteries.
TV Manufacturer Code Number TV Manufacturer Code Number
Akai 02, 04 Mivar 15
Beko 25 NEC 16
Daewoo 04, 05, 06 Panasonic 17
Finlux 26 Philips 04
Goldstar/LG 04, 07 Pioneer 19
Grundig 07 Samsung 04, 07
Hitachi 04, 27, 28 Sanyo 02
JVC 02, 11 Schneider 02, 03, 04
Loewe 04, 07 Sharp 21
Medion 04 Thomson 22
Mitsubishi 13, 14 Toshiba 03, 24