Filter
Top Products
45
nN
Using the Network Media Receiver - general settingsNetwork Media Receiver
5 Highlight a screen you want as the startup screen, and press SELECT.
6 Select OK, then press the SELECT button.
✍ The startup screen which you set as default is deleted if the AC power is interrupted.
Configuring your VAIO computer to start automatically
You can set your VAIO computer to start automatically when the Network Media Receiver attempts to connect. This is a convenient
feature to use when the computer is in a different physical location from the Network Media Receiver. This setting requires your
computer to be in Standby or Hibernate mode.
To have your computer start automatically when the Network Media Receiver connects, proceed as follows:
1 Click Start on the Windows taskbar and select Control Panel.
2 Click Performance and Maintenance, then click System.
The System Properties dialog box appears.
3 Click the Hardware tab, then click Device Manager.
The Device Manager window appears.
4 Click + next to Network Adapter.
The drop-down tree displays all available network adapters.
5 Double-click the network adapter that connects the computer to the Network Media Receiver.
The network adapter’s Properties dialog box appears.
6 From the Power Management tab, select the options Allow this device to bring the computer out of standby and Only allow
management stations to bring the computer out of standby.
7 Click OK.
8 Close the Device Manager window, then click OK to close the System Properties dialog box.
✍ A Power Management tab should be available for the selected network adapter. If more than one network adapter is listed, select the device that has the Power
Management tab available in the Properties dialog box.