Filter
Top Products
41
nN
Using the Network Media Receiver - general settingsNetwork Media Receiver
5 Highlight IP Address, then press the SELECT button.
The IP Address screen appears.
6 Highlight Specify IP Address, then press the SELECT button.
7 Highlight the IP Address numbers, then press the SELECT button.
8 Use the channel number buttons or the up/down arrow buttons to enter numbers for the IP address and the subnet mask, then
press the SELECT button.
9 Highlight OK, then press the SELECT button.
10 Turn the Network Media Receiver off, then restart it, to enable the changes to take effect.
✍ If you are not using a router device, select Obtain the IP address automatically (not using router). An IP address and subnet mask are generated automatically.