Filter
Top Products
Preparation
Basic Configuration by the Administrator
13
Basic Configuration by
the Administrator
You can monitor the camera image by logging in with
the initial conditions set for this network camera. You
can also set various functions according to the installing
position, network conditions or purpose of the camera.
We recommend you configure the following items
before monitoring images from the camera.
Setting contents Setting menu
Flip the image according to the installation position (desk top or ceiling). E. flip (page 36)
Set the format of the image sent from the camera. Video codec Tab (page 39)
Select the white balance mode according to the installing position (indoor or
outdoor).
White balance (page 37)
Select the brightness of the image sent from the camera. Exposure mode (page 37)
Brightness (page 38)
Select the quality of the image sent from the camera. Video codec Tab (page 39)
Select the view size of the image. View size (page 18)
Select whether the audio from the external microphone is sent or not. Microphone (page 36)
Synchronize the date and time of the camera with those of the computer. Date & time Tab (page 33)
Make the setting for sending the monitor image attached to an e-mail. e-Mail (SMTP) Menu (page 50)
Set the user access right for the camera. User Menu (page 45)
Set a place to be watched beforehand. Preset position Menu (page 47)
Prepare a panorama image. Creating a Panorama Image (page 80)